Available in 51metros & growing

Find Vapor Barrier & Encapsulation specialists near you.

Full crawl space encapsulation to stop moisture, mold, and wood rot for good.Drop your ZIP and we'll match you with one vetted local specialist for a free inspection — typically within 24 hours. We make the introduction. They handle the work. No spam calls, no five-way bidding war.

Free inspection One specialist, not fiveLicensed & insured No obligation

Vapor Barrier & Encapsulation — at a glance

Typical national cost
$5,500$15,000
Avg. inspection scheduled
Within 24 hours
Match time
Under 60 seconds

Scope of work

What crawl space encapsulation typically includes.

Encapsulation seals the crawl space against ground moisture using a heavy-duty (typically 12–20 mil) reinforced vapor barrier across the floor and up the walls, with vents sealed and a dehumidifier conditioning the space. The result is a clean, dry, conditioned area that protects your framing and improves indoor air.

The matched specialist will give you a written scope and estimate after the free inspection.

  • 12–20 mil reinforced vapor barrier across floor and walls
  • Foundation vent sealing
  • Drainage matting where needed
  • Sump pump and dehumidifier installation
  • Termite inspection gap and access door

Where you are

Vapor Barrier & Encapsulation in your metro.

Pick your metro to see the local soil, climate, and cost context your matched contractor will work with.

Dallas–Fort Worth metroplexOpen →

Vapor Barrier & Encapsulation in Plano, TX

Local cost typically $5,500$15,000. Most common cause: summer drought shrinking clay away from the slab perimeter.

Greater Houston areaOpen →

Vapor Barrier & Encapsulation in Houston, TX

Local cost typically $5,900$16,200. Most common cause: hurricane and flood saturation followed by rapid drying.

Denver Front RangeOpen →

Vapor Barrier & Encapsulation in Denver, CO

Local cost typically $6,200$16,800. Most common cause: bentonite swelling beneath slabs and basement floors (heave, not settlement).

Dallas–Fort Worth metroplexOpen →

Vapor Barrier & Encapsulation in Dallas, TX

Local cost typically $5,600$15,300. Most common cause: seasonal clay shrinkage pulling away from slab edges.

Austin–Round Rock metroOpen →

Vapor Barrier & Encapsulation in Austin, TX

Local cost typically $5,900$16,200. Most common cause: seasonal clay shrinkage pulling away from slab edges.

San Antonio metroOpen →

Vapor Barrier & Encapsulation in San Antonio, TX

Local cost typically $5,400$14,700. Most common cause: seasonal clay shrinkage pulling away from slab edges.

Oklahoma City metroOpen →

Vapor Barrier & Encapsulation in Oklahoma City, OK

Local cost typically $5,200$14,100. Most common cause: seasonal clay shrinkage pulling away from slab edges.

Tulsa metroOpen →

Vapor Barrier & Encapsulation in Tulsa, OK

Local cost typically $5,100$13,800. Most common cause: seasonal clay shrinkage pulling away from slab edges.

Phoenix Valley metroOpen →

Vapor Barrier & Encapsulation in Phoenix, AZ

Local cost typically $5,800$15,800. Most common cause: irrigation overspray or leaks concentrating water near footings.

Las Vegas ValleyOpen →

Vapor Barrier & Encapsulation in Las Vegas, NV

Local cost typically $5,700$15,500. Most common cause: irrigation overspray or leaks concentrating water near footings.

Albuquerque metroOpen →

Vapor Barrier & Encapsulation in Albuquerque, NM

Local cost typically $5,300$14,400. Most common cause: irrigation overspray or leaks concentrating water near footings.

Greater Los AngelesOpen →

Vapor Barrier & Encapsulation in Los Angeles, CA

Local cost typically $7,000$19,200. Most common cause: hillside creep or poorly compacted fill settlement.

Inland EmpireOpen →

Vapor Barrier & Encapsulation in Riverside, CA

Local cost typically $6,500$17,700. Most common cause: irrigation overspray or leaks concentrating water near footings.

San Diego CountyOpen →

Vapor Barrier & Encapsulation in San Diego, CA

Local cost typically $6,800$18,600. Most common cause: hillside creep or poorly compacted fill settlement.

San Francisco Bay AreaOpen →

Vapor Barrier & Encapsulation in San Francisco, CA

Local cost typically $7,500$20,400. Most common cause: hillside creep or poorly compacted fill settlement.

Silicon ValleyOpen →

Vapor Barrier & Encapsulation in San Jose, CA

Local cost typically $7,400$20,100. Most common cause: hillside creep or poorly compacted fill settlement.

Sacramento ValleyOpen →

Vapor Barrier & Encapsulation in Sacramento, CA

Local cost typically $6,400$17,400. Most common cause: hillside creep or poorly compacted fill settlement.

Puget Sound metroOpen →

Vapor Barrier & Encapsulation in Seattle, WA

Local cost typically $6,800$18,600. Most common cause: hillside creep or poorly compacted fill settlement.

Portland metroOpen →

Vapor Barrier & Encapsulation in Portland, OR

Local cost typically $6,300$17,100. Most common cause: hillside creep or poorly compacted fill settlement.

Wasatch FrontOpen →

Vapor Barrier & Encapsulation in Salt Lake City, UT

Local cost typically $5,900$16,200. Most common cause: snowmelt saturating soils near basement walls.

Colorado Springs metroOpen →

Vapor Barrier & Encapsulation in Colorado Springs, CO

Local cost typically $5,900$16,200. Most common cause: snowmelt saturating soils near basement walls.

ChicagolandOpen →

Vapor Barrier & Encapsulation in Chicago, IL

Local cost typically $6,300$17,100. Most common cause: hydrostatic pressure against basement walls after storms.

Twin Cities metroOpen →

Vapor Barrier & Encapsulation in Minneapolis, MN

Local cost typically $5,900$16,200. Most common cause: hydrostatic pressure against basement walls after storms.

Milwaukee metroOpen →

Vapor Barrier & Encapsulation in Milwaukee, WI

Local cost typically $5,600$15,300. Most common cause: hydrostatic pressure against basement walls after storms.

Metro DetroitOpen →

Vapor Barrier & Encapsulation in Detroit, MI

Local cost typically $5,500$15,000. Most common cause: hydrostatic pressure against basement walls after storms.

Indianapolis metroOpen →

Vapor Barrier & Encapsulation in Indianapolis, IN

Local cost typically $5,300$14,400. Most common cause: hydrostatic pressure against basement walls after storms.

Columbus metroOpen →

Vapor Barrier & Encapsulation in Columbus, OH

Local cost typically $5,400$14,700. Most common cause: hydrostatic pressure against basement walls after storms.

Greater ClevelandOpen →

Vapor Barrier & Encapsulation in Cleveland, OH

Local cost typically $5,400$14,700. Most common cause: hydrostatic pressure against basement walls after storms.

Cincinnati tri-state metroOpen →

Vapor Barrier & Encapsulation in Cincinnati, OH

Local cost typically $5,400$14,700. Most common cause: hydrostatic pressure against basement walls after storms.

Kansas City metroOpen →

Vapor Barrier & Encapsulation in Kansas City, MO

Local cost typically $5,300$14,400. Most common cause: hydrostatic pressure against basement walls after storms.

Greater St. LouisOpen →

Vapor Barrier & Encapsulation in St. Louis, MO

Local cost typically $5,300$14,400. Most common cause: hydrostatic pressure against basement walls after storms.

New York metroOpen →

Vapor Barrier & Encapsulation in New York, NY

Local cost typically $7,600$20,700. Most common cause: snowmelt and stormwater raising hydrostatic pressure.

Greater BostonOpen →

Vapor Barrier & Encapsulation in Boston, MA

Local cost typically $7,000$19,200. Most common cause: snowmelt and stormwater raising hydrostatic pressure.

Philadelphia metroOpen →

Vapor Barrier & Encapsulation in Philadelphia, PA

Local cost typically $6,200$16,800. Most common cause: snowmelt and stormwater raising hydrostatic pressure.

Pittsburgh metroOpen →

Vapor Barrier & Encapsulation in Pittsburgh, PA

Local cost typically $5,500$15,000. Most common cause: snowmelt and stormwater raising hydrostatic pressure.

Washington metroOpen →

Vapor Barrier & Encapsulation in Washington, DC

Local cost typically $6,800$18,600. Most common cause: snowmelt and stormwater raising hydrostatic pressure.

Baltimore metroOpen →

Vapor Barrier & Encapsulation in Baltimore, MD

Local cost typically $6,100$16,500. Most common cause: snowmelt and stormwater raising hydrostatic pressure.

Richmond metroOpen →

Vapor Barrier & Encapsulation in Richmond, VA

Local cost typically $5,600$15,300. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Hampton RoadsOpen →

Vapor Barrier & Encapsulation in Virginia Beach, VA

Local cost typically $5,800$15,900. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Atlanta metroOpen →

Vapor Barrier & Encapsulation in Atlanta, GA

Local cost typically $5,700$15,600. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Charlotte metroOpen →

Vapor Barrier & Encapsulation in Charlotte, NC

Local cost typically $5,600$15,300. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Research TriangleOpen →

Vapor Barrier & Encapsulation in Raleigh, NC

Local cost typically $5,700$15,600. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Nashville metroOpen →

Vapor Barrier & Encapsulation in Nashville, TN

Local cost typically $5,600$15,300. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Memphis metroOpen →

Vapor Barrier & Encapsulation in Memphis, TN

Local cost typically $5,200$14,100. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Birmingham metroOpen →

Vapor Barrier & Encapsulation in Birmingham, AL

Local cost typically $5,100$13,800. Most common cause: crawl space humidity leading to wood rot and sagging floors.

Greater New OrleansOpen →

Vapor Barrier & Encapsulation in New Orleans, LA

Local cost typically $5,800$15,900. Most common cause: heavy rain or tropical storms saturating clay around the home.

Jacksonville metroOpen →

Vapor Barrier & Encapsulation in Jacksonville, FL

Local cost typically $5,500$15,000. Most common cause: stormwater washout beneath slabs and driveways.

Central FloridaOpen →

Vapor Barrier & Encapsulation in Orlando, FL

Local cost typically $5,700$15,600. Most common cause: stormwater washout beneath slabs and driveways.

Tampa BayOpen →

Vapor Barrier & Encapsulation in Tampa, FL

Local cost typically $5,800$15,900. Most common cause: stormwater washout beneath slabs and driveways.

South FloridaOpen →

Vapor Barrier & Encapsulation in Miami, FL

Local cost typically $6,500$17,700. Most common cause: stormwater washout beneath slabs and driveways.

Broward CountyOpen →

Vapor Barrier & Encapsulation in Fort Lauderdale, FL

Local cost typically $6,400$17,400. Most common cause: stormwater washout beneath slabs and driveways.

Don't see your metro? Drop your ZIP above and we'll confirm coverage.

Warning signs

Signs you may need crawl space encapsulation.

If two or more of these appear in your home, it's worth scheduling a free inspection. Early repairs cost a fraction of late ones.

  • High humidity readings in the crawl space

  • Musty or earthy odors in upstairs living areas

  • Visible mold on joists or sub-floor

  • Recurring pest activity (rodents, snakes, termites)

FAQ

Vapor Barrier & Encapsulation — common questions.

Do I need encapsulation if I already have a vapor barrier?

An old, thin (6 mil) plastic sheet is not the same as a sealed system. Modern encapsulation uses thick reinforced liner, sealed seams, sealed walls and vents, and a dehumidifier — a complete system, not just a sheet.

Will encapsulation lower my energy bill?

Most homeowners see a 5–15% reduction in heating and cooling costs because the conditioned space is dry, sealed, and insulated from ground temperature swings.

How long does encapsulation last?

Quality 20-mil encapsulations come with 20–25 year warranties and routinely last longer with annual dehumidifier servicing.

Get matched with a crawl space encapsulation specialist — today.

One licensed local contractor. One free inspection. One written estimate. No spam, no bidding war, no obligation.